"DING and DENT" CannaCaged XL 10" x 3" Pressing Surface!
The 10" X 3" CannaCaged XL system is a step up from our 5" x 3" CannaCaged. A hash producers dream! Details are inside!
When we make these cages, sometimes mistakes happen and you have to make the best of it, We just got in a new round of CannaCaged XL in Kawasaki Green and have come to realize there is a machining error. It does not affect performance of the cage in anyway, but it is an error.
The heater holes on each end of this round of XL cages are 1/4 of an inch off center plate. This means the heater wire placement has to be monitored to make sure the wire does not come into contact with a spring as this may damage the wire when the cage and the spring are compressed.
This issue has been corrected and a QC check has beenimplemented at the machinist's level.
There are also some colour issues that affect how the cages look cosmetically, but this cosmetic defect does not affect performance of the cages.
To help mitigate this mistake and cosmetic defects found on this round of XL cages, we will be offering these cages heavily discounted.
You can save 50% off these "Ding and Dent" XL cages! We will even toss in an extra set of heaters just in case! These cages are sold as is and come with full warranties in place!
We build all CannaCaged XL with heating table style tops. This means there is no insulation between the top cage and the top pressing plate. This greatly enhances the versatility of the cages allowing you to use the entire 12.75" x 3" top of the cage as a post processing heating table. Sound interesting? Hit that "Contact Us" button just to the right and lets chat!
The CannaCaged XL system is the NEXT evolution of our CannaCaged and is geared towards the hash producer, utilizing a 10" x 3" pressing surface! Our cages and plates ride on precision machined solid steel posts and high quality tension springs, that ensure a smooth and accurate operation of the cage assembly and the plates are always aligned. Cages allow for better control of heat management to the ram, which can be important for those all day pressing sessions!
We make everything here in Canada, from buying Canadian made 6061 T6 aluminum, to machining, anodizing and assembly is all done locally and in house!
CannaCaged XL are universally compatible with most shop presses up to and including 20 ton presses. There is no real need to get anything over a 10 ton press, so you can save some money.
What you get:
1 set of CannaCaged XL c/w all hardware and fully assembled and ready to use.
Dual control ONLY c/w 4 x 500 watt heaters. Total Amp output is under 15 Amps
5 - 2" x 9" 25u CannaPlates CenterLine™ rosin bags.
2 CannaPlates Dab Mats. Use 1 under the cage!
2 year warranty on the electronics
Lifetime warranty on the cage and all hardware, springs etc.
Business cards and stickers.
Candy and dinos as usual!
Lifetime Customer Support... real support. We will help you with everything, from deciding towhat shop press to get, right on down to how to fold your parchment paper to get the best use out of it.
All mine and everyone else's rosin knowledge in CannaPlates SquishTown Discord Chat. Its a sharing community and with over 300 CannaPlates owners/users, its a rosin pressing heaven!
Inkbird ITC 100VH
Temperature Range: 0-400 CELSIUS (way more than you need or should ever use)
Power: 4 x 500W heater, 2 per platen.
Voltage: 110V/About 5 Amp draw PER controller
Platen Size: 3" x 10" / 7.6 cm x 12.7 cm
Cage Dimensions: 3" w x 12.75" l x 5.25" h / 7.6 cm x 32.39 cm x 13.4 cm
Space Between Upper and Bottom Platens: 1.625" / 4.12 cm
Space Between The Edge Of The Platen And The Springs: .25" / .65 cm
CannaCagedShipping Package: 12" x 12" x 6" / 31 cm x 31 cm x 16 cm